Punch DLX - Olive - Dreamwood

Wood type:

Olive (Olea europaea), Walnut (Juglans regia)

Limited Edition

Special version of the Punch vaporizer, with DLX line heater top.

10mm deeper herb chamber, horizontally divisible for turning and usable with NS 14.5 water filter adapter.

The DLX Punch is Dreamwood's portable home vaporizer.

Huge clouds of vapor in seconds!

Full flavor through convection heat technology!

Due to the extended steam path and the curved glass mouthpiece, the steam is ideally cooled!

The herbal chamber is tightly closed by a stainless steel sleeve when joining the parts and the two halves of the vaporizer are securely held together by magnets.

Curved shapes and wood with beautiful grain, as well as natural wood colors are trademarks of Dreamwood and so every Dreamwood vaporizer is unique! Produced in small series and unique in its form and color!

Included spare parts and accessories:

screens, o-rings, vaporizer stir stick and wood care polish.

The flavor is unadulterated and pure, much more natural than with plastic devices. The entire airway is made of natural materials and you will not notice any odors other than the different woods.
Many aromatic species are traditionally also used for aromatherapy purposes.
All materials used, e.g. the O-rings are harmless for health (silicone according to FDA regulations of the American food authority).
Delivery always with versatile tools, spare parts and a little wooden polish. Dreamwood Woodwax with beeswax is natural, seals and protects the wood and gives new shine.

Usage:

Remove DLX Heater Top.

Fill the herb chamber and press down the herbs lightly.

(Max. fill up to 2/3 otherwise the heater top sits directly on the herbs.)

Close the herb chamber again, put the parts back together.

To heat the herb, the jet-lighter flame is pointed into the heat intake tube while you inhale on the mouthpiece.

In general, don´t set the flame size too big and don´t inhale too slow!

For new users it is recommended to check the herb between inhalations more often and stirr if needed to prevent charring. When the material is vaporized, it is very dry and is easier to ignite! It requires some exercise to deal with this type of vaporizer but at the end its very easy to use!

Its easy to optimize the process for the right temperature and good results, after a few uses.

The temperature regulation takes place during the vaporization by manual control of the inhalation speed, the size of the jet-flame and the distance to the heat-intake tube.
Every user quickly finds a balance between air flow and heat supply. This way, vapor is produced immediately, and there is no unnecessary heating between inhalations.

Attention: The heat intake glass tube is HOT during and after use!
Do not touch it until it has cooled off.

The nozzle of the jet-lighter is getting hot too.

Proper handling for all Dreamwood Vaporizer Products is required.

The use of vaporizers and other products of Dreamwood Vaporizers is subject to your own responsibility and risk.

We assume no liability for damages to body, health and property.

Please inform yourself about possible risks and a proper handling before use.