Peacemaker Home Vaporizer Santos Palisander Set - Dreamwood

Woodtype: Amaranth=Purple Heart (Peltogyne) und Santos Rosewood (Machaerium scleroxylon)

The Peacemaker Vaporizer is the first electrically powered desktop vaporizer from Dreamwood Vaporizer.

• high quality materials / no plastic
• made by us in Germany
• only needs 4-6V 5A 20-30W
• exchangeable heating element made of borosilicate glass and kantahl A1 wire
• suitable for use with a water filter or with an adapter for dry inhalation
• great vapor production and pure taste
• heating element with NS18.8 (19/26) ground glass connection can be used universally

An adjustable DC 3-12V 5A ballast is required for operation. Not included!

On request we will be happy to send you a link to the right product.

The Peacemaker is not just any vaporizer, a lot of time and love went into this project. We tinkered and tested for a long time, after many prototypes this is the final version of the Peacemaker aka. Homevapo.

We wanted to go a different way and developed our own heating element because we were not satisfied with the available stainless steel and ceramic heating elements. Inspired by the Glow heating element, which also works with Kanthal A1 wire and is therefore extremely durable and tasteless, we have added additional mass with the borosilicate glass tube, resulting in an extremely powerful and durable heating element.

All parts are made by hand except for the plug and the ceramic socket. The DC plug and the ceramic socket are of the highest quality.

The heating elements are made by hand by us, as are all the wooden parts. We also do the wiring without soldering the connections. To insulate the cables and connections, pieces of temperature-resistant silicone tubing are used. The cables also have a silicone sheath.

Scope of delivery:

• Peacemaker vaporizer made of Purple Heart and base plate made of Santos rosewood.
• 16mm Santos rosewood bowl (hold on top bowl)
• pike/tamper tool made of Stainless steel and Santos rosewood.
• spare parts (O-rings, screens)

Instructions for use:

Plug in the Peacemaker Vaporizer (connect to the ballast), then switch on the ballast and set it to approx. 4.5V. Wait 5-10 minutes for the heating element to heat up. Fill the bowl and place it on the water filter, then hold the vaporizer with the end of the heating element on the bowl (16mm bowl) or insert it into the bowl (18mm bowl) and start inhaling. In order to avoid steam rising into the device, it is advisable to remove the Peacemaker from the bowl at the end of the inhalation. For dry inhalation, the herb chamber (dome sieve) in the mouthpiece is filled, then the adapter is placed on the 18mm joint of the mouthpiece. For vaporization, the adapter is then held onto the end of the heating element and inhaled. In order to achieve a better seal, it is recommended to turn the adapter/mouthpiece when placing it on the heating element.

The Peacemaker should be switched off after use to protect the wood from drying out. The vaporizer can also remain switched on for a longer period of time, but the voltage should then be regulated down to 3-4V between sessions. The outside of the wooden parts should also be treated regularly with wood wax or linseed oil to protect and preserve the beautiful wood.

Remarks:

• Unplug the unit and allow it to cool before inspecting the heating element.
• Do not leave the device unattended! Turn off!
• Never touch the heating element when the vaporizer is switched on or has just been used!
• Concentrates can be wrapped in hemp wool/organic cotton or dripped onto herbs to vaporize. Be careful not to use too much concentrate at once!

• This vaporizer requires some experience with electronics, if you have any problems please contact us!
• We assume no liability! Use at your own risk!

Your Dreamwood Vaporizer & Greendream Shop Team